0086-571-88220653 hzpt@hzpt.com
వస్తువులు
పేజీ ఎంచుకోండి

WP సిరీస్ వార్మ్ గేర్‌బాక్స్‌లు

WP series reducer, the worm is made of 45 # steel through heat treatment processing, and the worm gear is cast with tin bronze. It has good wear resistance, especially outstanding in bearing capacity, and is mainly applicable to the reduction drive of various mechanical equipment such as plastic, metallurgy, beverage, mining, hoisting and transportation, and chemical construction.

Cast iron worm gearbox–Inch Dimension

 

సిరీస్ UY
సిరీస్ QY
Series WY
సిరీస్ WDY
Series DSY
Series WDKY
సిరీస్ WOY
Series WDKOY
సిరీస్ AY

Please confirm the following parameters before purchasing

  1.  Please confirm the model and size you need;
  2. Please confirm the speed ratio of the reducer;
  3.  Please confirm the axial direction.

Single speed reducer

ratio: 1/5-1/60

WPA WPDA WPKA WPDKA
WPS WPDS WPKS WPDKS
WPO WPDO WPZ WPDZ
WPX WPDX WPKZ WPDKZ

డబుల్ స్పీడ్ రిడ్యూసర్

ratio: 1/100-1/3600

WPEA WPEDA WPEKA WPEDKA WPES
WPEDS WPEKS WPEDKS WPEO WPEDO
WPWEDO WPWEO WPEX WPEDX WPWEKO
WPWEDKO WPWE WPWED WPWEK WPWEDK

 

Universal speed reducer

ratio: 1/5-1/60

WPW WPWD WPWK WPWDK WPWA
WPWDA WPWKA WPWDKA WPWS WPWDS
WPWKS WPWDKS WPWO WPWDO WPWKO
WPWDKO WPWX WPWDX WPWKT WPWDKT
WPWT WPWDT WPWKV WPWDKV WPWV
WPWDV

Features of cast iron worm gearbox

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechanical equipment.
2. Large transmission ratio can be obtained by single-stage transmission, and the structure is compact. Most types of reducers have good self-locking performance, and braking devices can be saved for mechanical equipment with braking requirements.
3. The meshing friction loss between the worm thread and the tooth surface of the వార్మ్ గేర్ is large, so the transmission efficiency is lower than that of the gear, and it is easy to heat up and the temperature is higher.
4. సరళత మరియు శీతలీకరణ కోసం అధిక అవసరాలు.
5. Good compatibility, worm gears and worms are manufactured according to national standards, and బేరింగ్లు, oil seals, etc. are all standard parts.

Working conditions of cast iron worm gearbox

1. The worm speed of the worm gear reducer shall not exceed 1500r/min.
2. The working environment temperature is – 40 ℃ -+40 ℃. When the working environment temperature is lower than 0 ℃, the lubricating oil is heated to above 0 ℃ before starting. When the working environment temperature is higher than 40 ℃, cooling measures are taken.
3. The inlet shaft of the worm gear reducer can rotate forward and backward.
◆ Precautions:
1. Worm gear shaft cannot be used as input shaft.
2. The machine is not refueled when leaving the factory. It can only be operated after adding enough machine oil.
3. The matching మోటార్ (i.e. power) shall not exceed the value specified on the nameplate.
4. If the user wants to change the direction of the shaft, he can remove the two end covers of the lower shaft, take out the worm shaft and adjust it by 180. Load it. The second shaft can be driven slowly to make it mesh.

1 ఫలితాల 12-95 ని చూపుతోంది